Projets novateurs réalisés

Explorez des milliers de projets réussis issus de la collaboration entre organisations et talents postsecondaires.

29670 projets achevés

2811
AB
4990
Av. J.-C.
801
MB
663
NL
825
SK
8841
ON
9197
QC
95
PE
568
NB
1088
NS

Projets par catégorie

Estimating black bear kill rates of boreal caribou calves and the resulting effect on caribou population dynamics

Boreal caribou are federally listed as threatened due to widespread population declines. The main cause of decline is predation, which is influenced by human-caused landscape disturbance and climate change. Recent evidence suggests that black bear predation of caribou calves may be hindering the recovery of some caribou populations, but this impact is poorly understood in the western boreal forest. In northeastern Alberta, adult black bears were fitted with collars that record GPS location and the number of calves killed by each bear via “bear’s-eye view” videos. By identifying regions where black bear predation of calves has the largest impact on caribou populations, this research will inform where management strategies that protect caribou from multiple predators should be targeted. This research will directly inform the ABMI and its partners how to best implement management strategies to balance the ecological benefits of caribou recovery with the socio-economic benefits of natural resource extraction.

Voir la description complète du projet
Superviseur du corps professoral :

Stan Boutin

Étudiant :

Partenaire :

Institut de surveillance de la biodiversité de l’Alberta

Discipline :

Sciences de la vie

Secteur :

Services professionnels, scientifiques et techniques

Université :

Université de l’Alberta (en anglais)

Programme :

Accélération

Elaboration d’indices et de modeies predictifs

Ce projet de recherche vise a introduire des methodes automatiques recentes de detection des clients les plus fideles et de clients a risque au sein de I’entreprise Intema Inc. Des indices et des outils de visualisation pour les deux types de clients seront developpes afin de pouvoir assurer une bonne communication entre les experts de I’entreprise et les gestionnaires a qui ils s’adressent. Ce projet, en plus de pouvoir developper I’offre de service offertes aux clients d’lntema Inc., lui permettra d’integrer la logique du cheminement de preparation de donnees pour I’intelligence d’affaire. L’entreprise sera donc dote d’un nouveau produit et d’une methode pour avoir une architecture de donnees plus efficace pour developper de nouvelles solution.

Voir la description complète du projet
Superviseur du corps professoral :

Denis Larocque

Étudiant :

Partenaire :

Intema Inc

Discipline :

Affaires

Secteur :

Commercial Services; Commercial Services

Université :

HEC Montréal

Programme :

Accélération

Logistics behind implementing smart waste management system

Waste Management (WM) is increasingly becoming one of the major concerns in the modern world. The traditional way of make-use-dispose has created significant challenges for societies due to the increased level of landfills. Therefore, utilizing the generated waste as an integral part of the Circular Economy (CE) concept is turning out to be an important part of the economy of the modern world. Such initiatives have gained momentum by applying the tools and technologies introduced through Industry 4.0 (I4.0). This project proposes using I4.0 tools and technologies to revolutionalize municipal WM. Existing methods of WM have several inefficiencies, for example, a lack of inspiration to reduce the waste generated by each citizen, as well as the inability to measure the household wastes. This project introduces a smart waste management process to municipalities by implementing a one-of-its-kind smart bin product. The industrial partner needs to investigate the feasibility of this project, potential challenges during prototyping and implementation, stakeholders of this project, potential risks to fail the project, supply chain issues, and proving the sustainability of the project.

Voir la description complète du projet
Superviseur du corps professoral :

Hamid Afshari

Étudiant :

Partenaire :

Merivale Waste Management

Discipline :

Génie

Secteur :

Services administratifs et de soutien, gestion des déchets et remédiation

Université :

Université Cape Breton

Programme :

Stage en stratégie d’affaires

Front End Developer

2.2 billion people live with vision impairment: Over 1 billion are preventable or treatable. Even though the majority of cases are in Developing Countries, 75% of vision loss in Canada is preventable and 1 out of 5 Canadians are at risk of vision loss. Our emerging crisis of preventable blindness costs the Canadian government almost $33 billion annually. RetinaLogik is a social enterprise startup that aims to improve access to vision care services through utilizing technology and artificial intelligence (AI). Our novel platform unlocks the power of virtual reality for vision assessment, with an additional layer of early detection AI to detect conditions sooner. Our social enterprise model gets it to people who need it most. We are currently in the process of starting our clinical testing. However, one of the components that we need help developing before starting our trails is our front-end development. We are looking to incorporate best design practices that could make it smooth for clinicians through utilizing human-computer interaction principles.

Voir la description complète du projet
Superviseur du corps professoral :

Jia-Huai You

Étudiant :

Partenaire :

RetinaLogik Biotech Inc.

Discipline :

Informatique

Secteur :

les industries de l’information et de la culture; Fabrication

Université :

Université de l’Alberta (en anglais)

Programme :

Stage en stratégie d’affaires

IP and Commercialization Framework for the University of Alberta

This work will support University of Alberta’s “IP and Commercialization Policy and Processes Review and Recommendations Committee”, responsible for creating a new IP and commercialization framework that supports innovation and entrepreneurship at the University of Alberta. The work of this Committee will be transformational for the U of A, and will define its innovation and commercialization philosophy and success going forward. The Committee consists of senior executive leadership from the U of A, and will involve a comprehensive consultation process to garner internal and external input required to shape the new framework. Innovate Edmonton will be involved in the consultation process. Further, this work, in collaboration with Innovate Edmonton, will also help shape the programming offered by Innovate Edmonton to the UofA.

Voir la description complète du projet
Superviseur du corps professoral :

Aminah Robinson Fayek

Étudiant :

Partenaire :

Innovate Edmonton

Discipline :

Affaires

Secteur :

Administration publique

Université :

Université de l’Alberta (en anglais)

Programme :

Stage en stratégie d’affaires

AI-based lattice structure design for 3D printed customized health care cushion supports

Designing customized seating cushion supports for people with limited mobility is essential. A personalized cushion would help relieve seating pressure and prevent tissue injuries due to long-time sitting. This project aims to speed up and lower the cost of producing these cushions by using machine learning, and additive (3D) manufacturing techniques. This project is being led by the University of Alberta with support from Red Deer Polytechnic. The interns will gain valuable knowledge in data collection and using machine learning to solve real world problems that impact a person’s quality of life. They will also gain first hand experience working with an industrial client.

Voir la description complète du projet
Superviseur du corps professoral :

Tonya Wolfe;Xingyu Li

Étudiant :

Partenaire :

Assistability

Discipline :

Génie

Secteur :

Fabrication

Université :

Red Deer Polytechnic; University of Alberta

Programme :

Accélération

Analyse des facteurs d’attraction de la main d’œuvre dans les communautés nordiques.

L’objectif du projet de stage est de développer des outils afin d’identifier le profil de personnes désirant travailler dans les régions nordiques ainsi que les meilleures stratégies de recrutement pour les rejoindre. Pour ce faire, le stagiaire devra tout d’abord identifier les réseaux et les bassins de recrutement optimaux où l’on peut trouver de la main d’ouvre en santé prête à travailler dans les régions nordiques et les communautés autochtones. L’entreprise désire trouver et mettre en place des méthodes et des stratégies innovantes qui vont servir à identifier les meilleurs canaux de recrutement ainsi que les meilleurs outils de sélection pour identifier les profils adéquats.

Voir la description complète du projet
Superviseur du corps professoral :

Emilie Genin

Étudiant :

Partenaire :

Pimadzin Inc.

Discipline :

Sociologie

Secteur :

Services administratifs et de soutien, gestion des déchets et remédiation

Université :

Université de Montréal

Programme :

Stage en stratégie d’affaires

Design, development, and manufacturing of an ultra-efficient heat pump for cold climates

It is well known that space heating is the largest component of energy consumed by Canada’s building sector. Additionally, 64% of the energy used for space heating is from non-renewable sources. For Canada’s remote and rigid communities, which are our immediate target market, this percentage is even higher, greater than 75%. Heat energy naturally flows from higher to lower temperatures. However, heat pump-based technologies can transfer heat energy from lower to higher temperatures with the aid of an external energy source. Air-source heat pumps have several competitive advantages such as low cost, ease of installation, and best suitability for renewable energy sources. For cold climates, which are our target market, their adoption is limited due to low efficiency at temperatures below -10 oC and reduced heating capacity. Our proposed technology will address these challenges, especially lower efficiency at low temperatures.

Voir la description complète du projet
Superviseur du corps professoral :

Martin Agelin-Chaab;Sheldon Williamson

Étudiant :

Partenaire :

Terravis Energy

Discipline :

Génie

Secteur :

Fabrication

Université :

Institut de technologie de l’Université de l’Ontario

Programme :

Accélération

Recycling and reuse of fibre reinforced plastics

In this project we will employ a novel proprietary recycling solution developed by the sponsoring organization, Jeosal, to obtain fibres from recycled Fiber Reinforced Composites (FRP). High quality recycled glass and carbon fibres, extracted from composite wastes from end-of-life and manufacturing sources will be characterized in detail and melt compounded with polyamide. Suitable surface treatments will be implemented to enhance the interfacial interactions between the recycled fibres and the polymer matrix, thus improving the dispersion, and the mechanical properties. The resulting composites will be characterized in detail to assess their morphology, physical properties, and mechanical properties. The formulations will be optimized to suit the needs of the industrial partner. The knowledge generated by this project will have significant environmental benefits, by demonstrating a method to recycle Fiber Reinforced Composites, and has the potential to provide new value-added products suitable to various high value-added applications.

Voir la description complète du projet
Superviseur du corps professoral :

Marianna Kontopoulou

Étudiant :

Partenaire :

Jeosal Materials Research Corporation

Discipline :

Génie

Secteur :

Fabrication

Université :

Université Queen’s

Programme :

Accélération

Flax straw pellet for clean energy generation

Western Canada produces 40% of world’s flax for oil. After the harvesting of oilseed, an estimated 500,000 to 1,000,000 tonnes of flax straw is produced annually. Only small fraction of the straw is used and remaining are currently underutilized. The flax straw calorific value is similar to the woody biomass. Flax straw combustion for power generation could be a viable approach for the management of straw while providing renewable power. Additionally, co-firing flax straw in the existing coal fired power plant could substitute coal and thereby improve the carbon footprint. Even with greater potential for bioenergy production, the issues such as low bulk density, fibrous & hydrophilic nature, and potential for biological degradation during storage creates additional burden on the logistics of biomass handling. Furthermore, the presence of alkali and alkaline earth metal and sulphur and chlorine in the straw could lead to fouling and corrosion issues in boiler tubes. So, the qquestion remains regarding the combustion properties of flax straw pellets, and what would be the impact on the operation and overall efficiency of the power generation.

Voir la description complète du projet
Superviseur du corps professoral :

Bishnu Acharya

Étudiant :

Partenaire :

Prairie Clean Energy

Discipline :

Génie

Secteur :

Fabrication

Université :

Université de la Saskatchewan

Programme :

Accélération

Evaluation of Antibacterial, Antioxidant and Anti-inflammatory Efficacies of Honey and Bioactives Extracted from Honey Gummies

Island Abbey Foods (IAF) (also known as Honibe) is a leading manufacturer of honey based candies (lozenges, drops and gummies), which are premier products in the North American market. IAF is interested to investigate the biological activities of honey and other bioactive ingredients formulated in the form of gummies. The manufacturing of gummies requires high temperatures and harsh acidic conditions that may reduce the biological activities of honey and other active metabolites present in these products. In this project, IAF would like to partner with Ahmed research group at University of Prince Edward Island (UPEI) to understand the effects of gummy formation on antibacterial, anti-inflammatory and antioxidant activities of honey and other active metabolites (melatonin, vitamins) present in honey gummies.

Voir la description complète du projet
Superviseur du corps professoral :

Marya Ahmed

Étudiant :

Partenaire :

Island Abbey Nutritionals

Discipline :

Sciences de la vie

Secteur :

Services professionnels, scientifiques et techniques

Université :

Université de l’Île-du-Prince-Édouard

Programme :

Accélération

Real-time path identification and visualization in indoor environment using image analysis and deep learning techniques

The number of people requiring indoor navigational assistance (e.g., blind, elderly people) is increasing rapidly all over the world. People often get lost in complex places like hospital buildings. Unfortunately, the GPS service is not available indoor. The main objective of this project is to develop a robust and fast navigational technique based on continuous real–time image analysis and deep learning techniques. The proposed technique, namely NavNet, can be implemented through cell phone or an electronic display to guide the user from a starting point to the destination within an indoor environment. Although the primary intended application is to help people finding navigation path, the developed techniques can be also be extended to other applications such as robotics and disaster management. Clinisys develops a variety of secure, scalable and user-friendly e-Healthcare solutions and medical devices for the healthcare industry and patient population. The proposed project ideation emerged from discussions with several stakeholders e.g., the rehab patients at Glenrose Rehabilitation hospital. The proposed navigational software will be an important addition into the Clinisys Patient Portal.

Voir la description complète du projet
Superviseur du corps professoral :

Mrinal Mandal

Étudiant :

Partenaire :

Clinisys EMR Inc.

Discipline :

Génie

Secteur :

Information and Communications Technology; Artificial Intelligence; Transportation (excluding aerospace)

Université :

Université de l’Alberta (en anglais)

Programme :

Accélération

Précédent
1...1,3781,3791,3801,3811,3821,3831,384...2,473
Suivant

Rejoignez un écosystème d’innovation florissant.

Abonnez-vous à notre infolettre dès maintenant!

Abonnez-vous