Projets novateurs réalisés

Amélioration des procédés de brasage pour fixer des tuiles en carbure fritté à l’acier

N/A : Veuillez ajouter l’aperçu du projet, car je n’ai pas pu le trouver.

Merci!

Évaluation du système d’injection d’hydrogène

Ajouter de l’hydrogène au flux d’admission d’un moteur diesel de camion commercial peut réduire les émissions de CO2 du véhicule. Combiner l’hydrogène provenant des procédés de déchets industriels avec un système de ravitaillement robuste et à faible coût offre une approche à court terme et économiquement attrayante pour réduire les émissions de gaz à effet de serre du transport commercial par camionnage. Pour soutenir le développement de cette technologie, SFU et Hydra Energy s’associent pour étudier la performance et la longévité du matériel d’injection d’hydrogène. Les travaux utiliseront les installations existantes de la SFU pour évaluer la performance des injecteurs de carburant neufs, en service et en fin de vie. Les résultats de cette étude aideront à orienter le développement de nouvelles stratégies de contrôle capables de tenir compte des changements dans la quantité d’hydrogène au fil de la durée de vie des systèmes d’injection.

Expositions professionnelles aux émanations de moteurs diesel dans un port

Les expositions aux émanations de moteur diesel (EMD) sont omniprésentes et les chauffeurs de véhicules diesels constituent des groupes à risques au regard des fréquences et des intensités d‘expositions. Plusieurs méthodes ont été proposées pour évaluer l’exposition professionnelle aux EMD mais peu d’études comparatives sont disponibles et aucun consensus ne semble émerger. Le projet proposé permettra de tester plusieurs méthodes et permettra à l’association des employeurs maritime de documenter l’exposition de certains de ses travailleurs aux EMD.

Development of Low-Cost, Compact Optical O2 and CO2 Gas Sensors for Portable Metabolic Analyzers

The measurement of O2 consumption (V ?O2, V ?O2 max) and CO2 production (V ?CO2) is important in the health assessment. The goal of this research is to develop inexpensive optical technologies adapted from off-the-shelf components to reduce the cost and improve the performance of metabolic analyzers. VO2 Master, which is our sole partner organization, is a for-profit Vernon-based technology company that manufactures an innovative face-worn metabolic analyzer. The key challenge to be addressed is that commercially available O2 and CO2 sensors (currently integrated into VO2 Master’s analyzer) are not designed to operate under low flow volumes associated with the company’s patented gas sampling technology. Optical sensors will be explored to realize dual gas detection in a compact form factor that is amenable to the flow volumes of VO2 Master’s face-worn analyzer, opening up the potential for both improved performance and lower cost.

Spatial dynamics of sound beams in echolocating bats

This proposal uses advanced techniques in sound recording and analysis, statistics, and scientific computing to measure how
echolocating bats adjust signal strength and the spatial geometry of their sonar beam to aid in auditory perception. A second but
related project will compare vocalizations of young bats at different developmental stages and measure developmental changes in
their sonar beam. By participating in the Mitacs Globalink Research Award program, I will learn cutting edge methods in physical
acoustics and digital signal processing that will enable me to conduct world class research. In collaboration with my host
supervisor at the University of Southern Denmark, I will learn advanced techniques in acoustic recording, sound measurement,
and signal analyses using a 12-channel microphone array to measure source levels and reconstruct source positions over time
using time-of-arrival differences for each microphone. In addition to enhancing my theoretical and programming skills, this
internship will allow me to transfer new knowledge and practical skills in biological acoustics to my home lab in Canada. An
expected outcome of the internship is one or more collaborative peer-reviewed publications between the host and home labs.

Immunotherapeutic targeting of CD133 in adult brain tumors and understanding tumor microenvironment in Glioblastoma

Glioblastoma (GBM) is an aggressive adult brain tumor, and in spite of standard of care (SOC) with radiation therapy and chemotherapy with temozolomide tumor re-growth (or recurrence) and patient relapse are inevitable. There is compelling evidence that suggests SOC can debulk the tumor but cells endowed with treatment-resistant properties (e.g. expressing the protein marker CD133) could escape such therapies and initiate tumor relapse. Brain metastases (BM) are the most common and fatal brain tumors, and current SOC does not extend survival past 12 months. We identified BM cells to also express high levels of CD133, whose expression correlates with disease progression, recurrence, chemo- and radio-resistance and overall poor prognosis. We propose to test immune cells called NK /T cells with a synthetic protein that binds to CD133, allowing these NK/T cells to recognize CD133 on tumor cells and destroy them. In-house in vitro and in vivo GBM and BM patient-derived models will be used to test novel constructs supplied from our industry partner Century Therapeutics (CD133- CARNK/T). On the other hand, we will explore GBM tumor immune microenvironment (TIME) by performing integrative multiomics of primary and recurrent patient-matched GBMs including RNA seq, sciRNA seq and proteomics.

Modelling Acute Respiratory Distress Syndrome (ARDS) in Precision Cut Lung Slices (continuation)

As researchers strive to reduce the number of animals used in their research, many are turning to precision cut
lung slices (PCLS), thin organ slices prepared from fully developed mouse lungs. They represent a “mini-model”
that closely resembles the original organ in both anatomical structure and rich cellular environment. Despite the
increasing interest, no commercial system exists to provide a easy introduction to this technique that currently
requires lots of resources and expertise to perfect. With this project, we strive to provide researcher with a turnkey
solution for PCLS experiments by standardizing the technique and providing both instrumentation, software and
all experimental protocols to perform PCLS experiments from start to finish. We will then use this new platform
to compare outcomes of LPS induced ARDS, a model of interest for COVID-19 research when studying whole
mice and PCLS.

Development of a Natural Language Processing algorithm for the topic and novelty identification of scientific articles

Currently the selection of peer reviewers is a secret process entirely controlled by journal editors. This introduces significant biases into the process that fosters an environment that contravenes every aspect of equity, diversity and inclusivity, inhibits novel ideas and suppresses creativity which is just bad for science as a whole. Furthermore, research is most often published behind paywalls, making taxpayer funded research inaccessible to the average Canadian. Peer Premier is leading the charge to democratize scientific dissemination. We are using Artificial Intelligence, specifically the field of Natural Language Processing to match appropriate reviewers to papers requiring peer review. This will remove biases, increase peer review transparency and increase the quality, novelty and diversity of science. Providing a professional, certified peer review in a transparent manner will negate the requirement of having to publish the paper behind paywalls and scientific authors will be free to post their professionally peer-reviewed paper making it free to all Canadians who funded their research.

Development of femtosecond/picosecond laser and sample delivery for PIRL-DIVE-MS to enable spatial imaging of tissue and earliest possible detection of disease

Picosecond InfraRed Laser (PIRL) technology has finally realized the long-held promise of the laser to achieve the fundamental (single cell) limit to minimally invasive surgery – with the unexpected benefit of scar free healing. The very process of laser cutting involves the selective excitation of natural occurring water inside tissue to drive molecules into the gas phase in the form of an ablation plume. The cutting process occurs so fast that all the constituents within the tissue are injected into the gas phase perfectly intact, perfect for detection of biomolecules at the highest possible sensitivity and speed using Mass Spectrometers (MS) or charged particle detectors. This research promises to revolutionize medicine by enabling scar free surgery at the single cell limit of accuracy with complete biodiagnostics to guide surgery for optimal recovery of function and detect diseases from microbiopsies of tissue at the earliest possible stage.

Dielectric silicone elastomers based on antioxidants

The project involves modifying silicone with phenolic antioxidant as an agent that will enable the ability for the silicone to be used as a dielectric for elastomer actuators which have biomedical devices and soft robotics applications. The outcome of the project would be the discovery of new sustainable way to synthesize dielectric elastomer with green reagents, as well as antioxidant activities and enhanced performance as an actuator in terms of its durability and lifetime.

Anonymisation des données pour les dossiers médicaux

Data anonymization focuses on removing any personal or other information that would identify an individual or a set of persons from a given collection of records. In addition, anonymization should also mask information that could potentially be combined with other publicly available data to re-identify the individuals. This project aims to study data anonymization for medical records, particularly pertaining to radiology reports that are generated through use of particular software. The project involves the following steps i) identify the information that need to be masked by studying a random subset of data sampled from the database, ii) develop or adapt the existing off-the-shelf tools for individual NLP components such as identifying the grammatical tag of words, recognizing multi-word named entities, handling ambiguities etc., iii) integrate the individual components into a full system and evaluate the performance of the components as well as the end-to-end system and iv) implementing a process flow for anonymizing medical records including the structured tables in the records database. We also like to preserve the complete medical history of individuals as also retaining their links to individual physicians and medical technicians, suitably anonymizing the information.

Development of nanostructured biosensors for the detection of metabolites

Cancer poses a large and growing impact on the Canadian population and health care system. Developing technologies for accurate diagnosis of cancer in the early stage will decrease cancer mortality rates. Specific and sensitive detection of cancer biomarkers for point-of-care diagnostics applications has been a challenging goal for a long time in clinical diagnostics for decades. One of the reasons behind the limited commercial success of biosensors in complex biological samples is the high susceptibility of the sensing elements to biological fouling. To address these challenges the molecularly imprinted polymer (MIP) technology along with the antifouling coating will be used in this project to make the biosensor selective toward the cancer biomarkers. We propose the development of an electrochemical biosensor for selective detection of cancer-related metabolites (e.g.Hippuric acid (HA)) for the colorectal cancer diagnosis. The proposed biosensor contains an array of gold electrodes coated with a nanocomposite containing gold NPs, MIP NPs, and bovine serum albumin, and binding polymers. The mechanical, chemical and physical properties of the nanocomposite will be studied by analytical instruments such as transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectroscopy.