There are four main objectives for the proposed project: (1) To investigate three techniques of aiding the wet screening process including: (a) inclined screening combined with water jets, (b) sonication, and (c) a combination of those two techniques, to find optimum operating conditions for each technique and allow them to be evaluated and compared. (2) […]

The state-of-the-art polymer electrolyte fuel cells have catalyst layers (CLs) made of Platinum catalyst on carbon support (Pt/C) bound together by proton-conducting polymer or ionomer. To overcome the challenges of high cost of Platinum catalyst ad corrosion of carbon support, alternative materials for catalyst and catalyst support are being considered. The interaction of ionomer with […]

The state-of-the-art polymer electrolyte fuel cells have catalyst layers (CLs) made of platinum catalyst on carbon support (Pt/C) bound together by proton conducting polymer or ionomer. To overcome the challenges of high cost of Platinum catalyst and corrosion of carbon support, alternative materials for catalyst and catalyst support are being considered. The interaction of ionomer […]

This postdoctoral study seeks to help Teck understand the practices that support and advance the company’s sustainability, its employees’ safety, Its collaboration with communities and Its protection of the environment. Through a series of case studies, the researcher will explore how Teck has managed the tension between regulatory compliance and sustainable innovation. The researcher will […]

Copeman Healthcare Centre is engaged in a multi-year research and development program in the area of cognitive health. Cognitive health is a surrogate marker for brain health. All other technologies, such as biomarkers, electrophysiology, structural brain imaging, and functional brain imaging attempt to measure damage to the brain. Moreover, these technologies do not measure or […]

Copeman Healthcare Centre is engaged in a multi-year research and development program in the area of cognitive health. Cognitive health is a surrogate marker for brain health. All other technologies, such as biomarkers, electrophysiology, structural brain imaging, and functional brain imaging attempt to measure damage to the brain. Moreover, these technologies do not measure or […]

The main cause of cardiovascular disease (CVD) is narrowing of blood vessels due to atherosclerosis. In such cases stents are chronically implanted in -arteries to physically expand and scaffold the vessels. Each year, ~90,OOO stents are implanted in Canadians. All these minimally invasive procedures involve the use of a catheter. Currently available catheter tubes advance […]

The main cause of cardiovascular disease (CVD) is narrowing of blood vessels due to atherosclerosis. In such cases stents are chronically implanted in -arteries to physically expand and scaffold the vessels. Each year, ~90,OOO stents are implanted in Canadians. All these minimally invasive procedures involve the use of a catheter. Currently available catheter tubes advance […]

The Institute of Biomedical Engineering at UNB is at the frontier of myoelectric signal acquisition and interpretation in patients with prosthetic devices. A particular challenge is understanding the effect of surface contact pressure on voltage measurements at the skin-electrode interface. Smart Skin Technologies (SST) is a New Brunswick company developing multi-touch pressure sensors aimed at […]

Pressure vessels made entirely from fiber-reinforced polymer can generate substantial cost and performance improvements leading to their greater acceptance as a storage medium for pressurized alternative fuels (e.g. hydrogen). Inherent anisotropy and inhomogeneity of fiberreinforced composites usually induces functional failure (i.e. leakage) that precedes structural failure by bursting. Functional failure is attributed mainly to transverse […]

This project will result in the development of a simple, reliable, and rapid system for detecting E. coli bacteria in water for public health and environmental monitoring. We will use paper-based microfluidics fabricated by common laser-jet printing techniques. When E. coli is detected by the device, a color change becomes visible and can be quantified […]

This proposed research project is about development of new bone-targeting drug called PTHPEG- BP, this new compound will overcome shortages of current clinical peptide hormone PTH, and show better treatment efficacy and lower price then the latter; several new technologies will be used on research of this PTH, such as micro Positron Emission Tomography (PET/CT), […]