The share of Renewable Energy (RE) resources in overall power generation has grown over the years. Since these RE resources are located at places which are away (off-shore, desert) from the load centres, efficient and reliable power transmission to load centres is extremely important. High Voltage Direct Current (HVDC) transmission has evolved as the preferred […]

This project aims to establish an ion-exchange/nanofiltration pilot study at the Waterhen water treatment plant. A natural result of the chlorination disinfection process in water treatment is the formation of disinfection by-products (DBP), a family of known carcinogens. This project aims to limit the formation of these DBP by removal of their precursors using the […]

Unpaved gravel roads throughout rural and northern Manitoba and across Canada are made from poorly bound aggregate materials. Consequently they quickly deteriorate to loose, rough and dangerous road conditions. They generate choking and noxious dust clouds when dry, and quickly lose strength and degrade to mucky and rutted conditions when wet. The goal of this […]

The purpose of the project is to generate soybean plants able to tolerate whole plant submergence and waterlogging (soil submergence). This will be achieved by inducing Pgb, a gene normally present in soybean and known to confer tolerance to excessive humidity, through genetic manipulations. Correlative studies between Pgb expression and performance under excessive water conditions […]

By creating real-time and hardware porotypes, the proposed research provides opportunities for better investigation of these converters and for development of advanced and effective methods for their control. The three interns that will be trained during this research partnership will gain in-depth knowledge of modern power system equipment and knowledge of the latest developments in […]

Natural fibres are abundant in Canada and have the potential to be used in a wide variety of biocomposites and industrial bioproducts. In order to develop a thriving biomaterials sector, the quality and consistency of this vast resource must be continually assessed and monitored to ensure a quality product can be delivered to end-users on […]

In this study, an advanced frequency scanning method is used to extract the frequency dependent network equivalent (FDNE) impedance characteristic of a power electronic subsystem such as an HVDC transmission system or FACTS device including its controls. This is achieved by simulating it in the time domain on an EMT program, and exposing it to […]

Copy number variations (CNVs) are an important type of structural variation affecting pathogenesis of complex diseases, such as inflammatory bowel disease (IBD). Accurate detection of genomic regions with CNVs is crucial for understanding the etiology of IBD, as these regions contain likely drivers of disease development. Microarray technology provides single-nucleotide resolution genomic data and is […]

With worldwide efforts to increase the utilization of renewable energy, traditional power distribution networks are being transformed into active distribution networks with the interconnection of distributed generation. The status of DGs connected to an active distribution network can change frequently, and this creates many challenges to network protection. The aim of this project is to […]

Nanosilver is an antimicrobial agent found in thousands of commercial products, frequently released into waterways as a result of their use in clothing and washing machines, as well as many other products with potential for environmental release. Though regulations on environmental release exist for elemental silver, no regulations exist for nanosilver release into the environment. […]

A parallelized electromagnetic transient (EMT) simulation tool for power system transients will be developed in this research to accelerate the internal computation process. An EMT simulator uses a highly detailed representation for the power systems components. Conventional EMT simulators typically execute sequentially on a single processor; and computational effort increases significantly with network size. Graphics […]

Biomass combustion is used to generate combined heat and power (CHP). The combustion furnace of this study (WiseWay) has been providing heat in small scales using wood pellets. The target of this project, however, is to upgrade the stove’s design (for larger scale purposes and other biomass types) and integrate it with a steam microturbine […]