International legislation and growing environmental issues have imposed a lot of pressure on companies and manufacturers to maximize the recycling systems. Such demands have had significant consequences for the plastic industries to use recycled plastics from the disposed plastic wastes. Therefore, this study is an initiative taken by the Nanomaterials and Polymer Nanocomposites Laboratory (NPNL) […]

Tasks involving lifting, pushing, and carrying (e.g., lifting laundry, cleaning the floor) are often challenging, especially for seniors and people with limited mobility. On stairs, performing these tasks becomes dangerous, potentially leading to serious injury (falls, back strain, etc.). Quantum Robotic Systems Inc. (QRS) addresses this problem by making unique mobile service robots. QRS has […]

To reduce carbon footprints, the development of new materials with enhanced properties is of great importance. The construction industry, with a record of 9.95 Gt of CO2 production in 2019, is the 3rd largest sector contributing to climate change31. One way of reducing the amount of carbon in their manufacturing process is by adding materials […]

More than 80% of power outages in power grids are caused by faults in distribution networks. To improve the system’s reliability and resiliency, the service restoration is critical after faults. The Soft Open Point (SOP) is an emerging power electronic device, which can be connected to terminals of feeders or between networked microgrids, and can […]

Lower extremity wounds are painful wounds in the legs and feet that can result from immobility (e.g. secondary to Multiple Sclerosis, spinal cord injury), peripheral vascular disease and/or diabetes. They are slow to heal and cause immense pain and suffering. These wounds can cause infections, may lead to amputations, and in more severe cases, death. […]

The proposed research project aims at technology for environmentally benign recycling of nickel. The process entails conversion of nickel found in the “black mass” from recycled Ni-based batteries into nickel carbonyl, Ni(CO)4, by reaction with CO at modest temperatures around 50-120°C (pressuredependent). Only nickel carbonyl is volatile under these conditions and is easily separated from […]

La recherche consiste à appliquer le protocole d’utilisation des tests de contamination des surfaces et de l’air par ATP-métrie, définie dans un précédent projet Mitacs. Elle consiste donc à appliquer ce protocole d’utilisation des tests de contamination d’air et de surface dans les locaux de l’École de Technologie Supérieure de Montréal. Trois étapes sont nécessaires […]

Piloter la transition écologique nécessite de connaître nos impacts environnementaux et d’évaluer les pistes de réductions de ces impacts de manière fiable. Or, on évalue rarement cette fiabilité, et les prises de décisions environnementales sont encore trop souvent basées sur des intuitions parfois erronées ou des résultats d’analyses peu pertinents et non fiables. L’objet de […]

As the climate change problem has been a serious global issue, we have been making effort replace internal combustion engine to electric vehicles (EVs) to reduce carbon emission. As demand for EVs increases, it is necessary to research an infrastructure; such as an efficient and intelligent EV charging system, to support various charging services. Wireless […]

Amputations of the upper limb are devastating injuries which can significantly affect the capability of performing daily living, working and social activities. The current challenges of prosthetic solutions exist due to the lack of modular design, comfort, immediate response to user intention, interfaces and tactile feedback. The long-term objective of Awenza Health is aiming at […]

This project will support a Master’s UNB student to investigate the impact of including pyrolysis products (bio-oil and biochar) in asphalt mixtures by designing asphalt mixes that meet the requirements set for pavement applications. The use of carbon-rich bio-oil and biochar; could positively impact the properties and rate of oxidation of asphalt materials. Also, the […]

This project’s goal is to build an algorithm that is able to understand and summarize content and sentiment from multiple sources based on a given topic or opinion. This algorithm would then be adapted into TrafficSoda’s existing infrastructure allowing them to maintain and grow a competitive advantage in our marketplace. It would also save the […]