Amélioration de la technologie de mesure infrarouge ICOS

L’objectif général du projet, divisé en trois stages, vise l’amélioration des procédés d’assemblage et de calibration des instruments ICOS pour la mesure précise de gaz jusqu’à des concentrations aussi faibles que des parties par milliards (PPT). Les deux premiers stages ont pour but d’améliorer les outils de calibration des systèmes ICOS, plus spécifiquement en utilisant […]

Read More
Hydrothermal Liquefaction of Woody Biomass Waste

The focus of this project is hydrothermal liquefaction of woody biomass waste. Woody biomass waste could include branches or woodchips from logging and wood processing. The waste material is ‘cooked’ with water at extreme temperature and pressure to produce waste oil. The low energy carrying woody biomass waste is converted into a higher energy carrying […]

Read More
Metal-organic framework-based electrodes for CO2 capture and conversion

The world’s stringent need to transition to a low-carbon industrial economy is more pressing than ever. It is imperative to innovate, develop, and implement revolutionary technologies that use low-carbon-intensity energy generation sources and have an intrinsic negative GHG emission factor while being economically profitable. The electrochemical carbon dioxide reduction to fuels and chemicals coupled with […]

Read More
Design of Prefabricated Exterior Wall Panels for Robotic Building Retrofit

Retrofitting aging commercial buildings from the exterior using wall panels can increase their sustainability and energy efficiency. The partner, RoBIM Technologies Inc., is developing an end-to-end automated solution by using robotic technologies and introducing more energy efficiency materials into the panel design. The combination of robotic prefabrication and sustainability of engineered wood products (EWPs) are […]

Read More
Atmospheric water harvesting with carbon nanoporous sponges

Water scarcity threatens more and more people in the world. Cape Town (South Africa) imposed strict water restrictions in 2018 in response to shortages. Closer to home, water restrictions were put into place in Quebec in the summer of 2020, and First Nation communities have been confronted with fresh water issues for years. Water scarcity […]

Read More
Building more housing with less embodied greenhouse gas

This research has two goals to a) increase our understanding of the quantity of construction materials and embodied GHG used, in current practice, to create new housing in the City of Toronto and b) to identify opportunities to use changes in building and neighbourhood form to create more housing with less total embodied GHG. The […]

Read More
Design and development of a novel bioink for HeartPrint

Cardiovascular disease is one of the world’s leading causes of mortality. However, due to a scarcity of heart donors, new cardiac regenerative medicine sources are desperately needed. The increasing use of biomaterials in tissue engineering has created a direct and promising platform. However, technical advancements are still needed to properly create a heart structure with […]

Read More
Assessing Community Well-being Risk for Supporting Decisions on Investments for Social Sustainability

Community well-being is important for building housing, income, food, and health security. The COMEAI causal model is available for evaluating the risk to housing, income, food, and health security criteria. The model has a potential for improvement to account for the lack of critical practical application and evidence-based literature support. This research aims to validate […]

Read More
Surveillance continue des perfluorocarbures issues de la production d’aluminium

La production d’aluminium primaire est un processus produisant une quantité importante de gaz à effet de serre. Par souci de mieux quantifier et de réduire la quantité de GES émis, Rio Tinto a fait l’acquisition d’un appareil de mesure permettant de suivre un type précis d’émissions de GES, associée à plus de 25% des émissions […]

Read More
Development and validation of treatment optimization planning software for MRI guided focal laser ablation of prostate cancer

Over 23,000 men were diagnosed with prostate cancer (PCa) in Canada in 2020. Focal therapy uses high energy focused heating delivered via a laser fiber to destroy the tumour and has shown promising results in controlling prostate cancer. Magnetic resonance imaging (MRI) allows the surgeon to distinguish the cancerous tissue from healthy tissue, better customize […]

Read More
Use of Advanced Customizable Leach Columns as a tool to characterize the physiochemical processes occurring in mine waste rock and tailings

Mining generates large amounts of waste (e.g. waste rock and tailings), some of which contains sulfide minerals that oxidize and produce acid rock drainage (ARD) when exposed to oxygen. Mine waste is commonly stored on-site in storage facilities which can account for > 80% of all ARD produced. Several methods exist to address ARD potential, […]

Read More