The main purpose of this project is to develop the methodology to detect and predict driver drowsiness at the early stages using physical and physiological variables. A feasibility test is conducted to evaluate the accuracy and performance of the proposed methodology. The existing databases are leveraged to extract the required data. Signal processing, image processing, […]

Computed Tomography (CT) is one of the most widespread non-invasive imaging modalities in medical diagnostics. Recent concerns regarding radiation induced cancer, has drawn a lot of attention to reduce the radiation dose used during CT scanning. However, the signal to noise ratio of scans taken at lower radiation dose is considerably lower than at higher […]

L’organisme partenaire, Blue Solutions Canada, est notamment spécialisé dans la fabrication des batteries LMP® (Lithium Métal Polymère) utilisées dans des applications mobiles (véhicules tout électriques) et stationnaires. Les batteries LMP® contiennent un électrolyte solide polymérique (EP), dont la température optimale de fonctionnement est supérieure à la température ambiante. L’objectif du projet vise à développer et […]

Pipelines are extremely important for the transportation of oil and gas. Buried pipelines can move in a relatively large distance under special scenarios, e.g. slope failure. Meanwhile, the surrounding soils are subjected to a large deformation. This project aims to develop a computer modeling technique to analyze the large-deformation behavior of soil and its impact […]

Petroleum contamination in soil and groundwater caused by the leakage of underground storage tank is one of the most frequently occurred incidents in North America. The cost of remediation can be significantly increased if the contamination was not treated in time or the site is far away from the waste management facility. a mobile soil-flushing […]

The objective of the proposed project is to map all engineering processes involved in aeroelasticity calculations at Bombardier Aerospace and develop methods for holistic analysis and improvement of the aeroelasticity process, for the sake of performing better overall improvements and more realistic quantitative validations of those improvements. Existing methods and techniques for process mapping will […]

Most rubber products require curing that involves either sulfur or peroxide curing and other ingredients such as accelerators, antioxidants, antiozonants, and heavy metal oxides. Some of these ingredients, either individually or in combination, generate environmental pollutant and hazardous gases and fumes during rubber processing or storage. Thus, there is a continuous need by the rubber […]

The goal in medicine is prolong life and prevent disease before it spreads and becomes irreversible. There must be a way to easily self-monitor or to allow medical professionals to continuously remotely monitor high risk patients. The main vital signs that ideally should be constantly evaluated are pulse rate, respiration rate, body temperature, oxygen saturation […]

Quantum Computing has the potential to tackle problems, unsolvable with the most powerful current high-performance machines. It is expected that quantum technology will enable life-changing discovery in the pharmaceutical industry with new drugs, finance for risk minimization, discovering new materials, clean energy, and more. Today, many different architectural solutions exist for quantum computing – photonic, […]

Argillaceous shales comprise a large proportion of rocks in most sedimentary basins. They serve as caprocks in the projects of petroleum industry. Maintaining borehole and caprock integrity is to prevent disasters such as borehole collapse and leakage through caprocks. Thermal-hydro-mechanical properties of argillaceous shales have decisive controls on the integrity analysis. As a kind of […]

Il existe encore plusieurs défis pour soutenir l’utilisation des outils de simulation de la performance des bâtiments (BPS) et de la conception intégrée (CI) pour la conception de nouveaux bâtiments. La ville de Beaconsfield aimerait se doter d’une approche adaptée à leur contexte qui soutiendrait la conception d’un nouveau centre multifonctionnel écologique et polyvalent ayant […]

What is left after late-life SAGD production is a large amount of valuable energy in the form of heat contained in the reservoirs. Instead of leaving behind the stored energy in a hot reservoir after many years of SAGD operation, considering energy recovery from post-SAGD reservoirs leads to lower carbon emissions by saving energy already […]