This project shows the possibility of decreasing the power consumption of Industrial robotics. Design methodology for Intelligent Energy Management for Production Facilities with Robotics Automation [IEMPRA] is proposed to Cherkam, by predicting the energy consumption over the energy model, which delivers a guide to enable energy-efficient approaches. The total energy consumption is evaluated using ML […]

Cette recherche porte sur le développement de nouvelles méthodologies de diagraphies qui seront adaptées et optimisées pour le contexte des fondations rocheuses des ouvrages de génie civil. Le travail de la thèse consistera d’abord à évaluer les potentiels d’intégration des différentes techniques de diagraphies disponibles dans un système holistique. L’identification des spécificités du domaine du […]

The goal of this partnership is to conduct preliminary research on developing a hand-held biosensor built from state-of-the-art silicon photonics technology. The multiplexed architecture of our biosensor will allow us to simultaneously assay for different infections; it will be a general platform. UBC has developed a new architecture for low-cost multiplexed testing (patent pending). This […]

The goal of this partnership is to conduct preliminary research on developing a hand-held biosensor built from state-of-the-art silicon photonics technology. The multiplexed architecture of our biosensor will allow us to simultaneously assay for different infections; it will be a general platform. UBC has developed a new architecture for low-cost multiplexed testing (patent pending). This […]

In thermal-solvent assisted gravity drainage recovery processes, bitumen viscosity reduction takes places under combined effect of heating and dilution. Imperial has been optimizing the existing solvent recovery processes and developing new technologies to improve the efficiencies and environmental performance of the heavy oil production operations. Recent focus of the company has been in the area […]

Autonomous vehicles (AV) need to see ahead since the driver no longer drives the vehicles. The driver’s eye in AV is replaced by the Light Detection and Ranging (Lidar). However, the distance ahead of the autonomous vehicle that must be available, called sigh distance SD, is less for AV because the perception-reaction time of the […]

La filière de l’hydrogène est en pleine effervescence au Québec. Pour accélérer son déploiement, de nouvelles utilisations de l’hydrogène doivent être ciblés. L’industrie lourde, ses activités industriels et les parcs industriels et portuaires qui les abritent sont de potentiels utilisateurs d’hydrogène. Ce projet vise à identifier de nouvelles utilisations de l’hydrogène dans un parc industriel […]

A new computational model will be developed that allows the industrial partner to design more efficient sand separation devices for the oil and gas industry. The computer model will be developed within an open source software, which means that, in addition to benefiting the industrial partner directly, it will also contribute to the increased accuracy […]

Switched Reluctance Motors have gained considerable attention in various applications such as vehicle electrification due to its advantages such as simplicity, robustness, compactness, and low-cost. The proper, and efficient operation of the SRM triggers the requirement for an optimal motor drive design. Traditional converter design in power electronics has some limitations such as slow time […]

Brazing and braze welding is like welding in that it joins metals using heat and filler metal but differs from welding in that the temperatures used are not hot enough to melt the base metal. The type of filler metal used during brazing and braze welding is significant because it directly impacts the strength and […]

This project will develop a general method to identify optimized parameters for laser cladding. The use of powder feed permits laser processes to be used for complex material systems, each with their own unique characteristics and behaviour. To identify suitable operating conditions, industrial practitioners rely heavily on historical experience with limited scientific basis and an […]

Bio-materials can reduce our dependence on fossil fuels, greenhouse gas emissions and facilitate a rapid transition to a bio-based leconomy. Thus, developing novel and innovative technologies and products related to bio-materials sectors is crucial. This has !resulted in extensive research into the development of biomaterials. Most research efforts have focused on materials selection, ‘fabrication, and […]