This project will combine filtration characterization and advanced 3D imaging and modelling of material structures to find ways to improve the recovery of process water from difficult-to-treat tailings that are the by-product of mining and mineral processing. This process is called solid-liquid separation and it is a critical area for the reduction of oil sands […]

Yukon Energy Corporation (YEC) began generating hydro-electricity at the Aishihik Hydro Facility, situated within Champagne and Aishihik First Nations’ (CAFN) Traditional Territory, Yukon, in 1975. Their continuing water use license will expire in 2019. Notwithstanding the Aishihik facility’s 41 years of energy production, CAFN has repeatedly expressed social and environmental concerns associated with the facility’s […]

Fine particulate air pollution is recognized as causing health problems globally, but health researchers are just starting to understand where people receive their exposure, which will influence policies and regulations. There is a need for size-resolved particle measurements using a device that can be carried easily by a person. Nanozen has built such a device, […]

La fabrication de pièces aérospatiales représente plusieurs défis importants. Parmi ces défis, le chiffrage des coûts et de manière générale la gestion de l’ensemble des informations est un casse-tête souvent très difficile à solutionner et dépendant de représentations géométriques. La solution idéale doit permettre la combinaison d’informations multifactorielles tenant compte du capital humain, structurel et […]

Discovery Agents is a leader in mobile, augmented reality educational technology, with products and services intended to enhance student and teacher experiences within informal and formal educational settings. With a growing industry demand for diverse science, technology, engineering and mathematics (STEM) professionals, this study proposes to examine the impact of the Discovery Agents Mission Builder […]

The bond between adhered manufactured stone masonry veneer units and the setting bed mortar will be studied. It will involve testing shear, and tensile bond on small samples. Samples will consist of 2 types of adhered manufactured stones; two types of setting bed mortar (Type S, and modified dry-set cement mortar); and two types of […]

Over 350,000 Canadians live in long-term care facilities where the rate of falls is up to 3 times higher than among individuals living in the community. Wearable sensor technology holds great promise to accurately monitor an individual’s fall risk based on the activity profile and to detect dangerous fall events. With the understanding that hip […]

Counting coins, with speed and accuracy, has been a challenging issue for banks and stores. People used to count coins manually before the arrival of coin counting machines. The process of counting coins manually is a very time consuming and tedious job. Moreover, mistakes are likely to occur due to various reasons such as fatigue, […]

Work conducted during this project will involve the extension and further development of existing methods for detailed measurement and subsequent modelling of radiowave propagation characteristics in indoor environments at extremely high frequencies. Results will enable the determination of the powers, time delays, and angles of arrival of waves incident upon a receive antenna over direct, […]

L’introduction des technologies de l’information dans l’industrie de la construction est de plus en plus perçu comme incontournable, vu les gains en qualité et délais réalisés. Le BIM est un processus et une technologie qui permet de réaliser cet objectif ; dans le cadre de ce projet, il sera réalisé un guide sur le BIM […]

Current Computational Pipeline Modeling based leak detection systems can not accurately predict the leaks in the pipeline when crude oil goes though phase change (column separation) along the 100s of kms long pipeline (due to hills and valleys). The objective of this project is to gain fundamental insight into the two phase gas-liquid flow physics […]

Le passage au numérique de l’industrie de la construction marque une transformation radicale des méthodes de travail et processus associés à la technologie. Afin de tirer les meilleurs avantages de ce changement technologique, et plus particulièrement de l’utilisation du BIM (Building Information Modeling), de nombreuses recherches ont étés menées en partenariat avec les concepteurs et […]