Electrochemical carbon dioxide recycling offers an attractive approach to the synthesis of fuels and chemical feedstocks using renewable energy. However, fundamental and applied science hurdles remain on the path to the deployment of this technology. Integrating catalytic design and mechanistic understanding will lead to scientific insights and advance the technology towards industrial relevance. Catalysts must […]

This project aims at developing new coating materials exhibiting high oxidation, corrosion and wear resistance to addresses the specific needs of power generation equipment, which operate under severe erosion and abrasion conditions in corrosive environments.

To combat the degradation of receiving water resulting from stormwater runoff approaches that focus on retaining and infiltrating stormwater at the source, referred to as Low Impact Development (LID) practices, are being proposed more frequently in recent years. Toronto and Region Conservation Authority recently initiated monitoring of precipitation and runoff from a large industrial site, […]

Cerebral aneurysm (CA), is an abnormal dilation of the cerebral arterial wall, which accounts for more than half a million deaths each year worldwide. Flow diverters (FDs) represent one method recently developed in treating CAs. Typically, they do not need coiling (releasing platinum micro-coils within the aneurysm) and act purely to prevent substantial blood inflow […]

Cerebral aneurysm (CA), is an abnormal dilation of the cerebral arterial wall, which accounts for more than half a million deaths each year worldwide. Flow diverters (FDs) represent one method recently developed in treating CAs. Typically, they do not need coiling (releasing platinum micro-coils within the aneurysm) and act purely to prevent substantial blood inflow […]

Real-time digital power system simulators are used for testing and debugging control equipment intended for field installation. They simulate the power network in ‘real-time’, i.e., the simulation computations are rapidly completed so as to retain synchronism with a real-world clock. This requires the level of complexity in different components of the network to be judiciously […]

Currently, the global warming alerts, oil prices fluctuations and clean energy have paved the way of investing in the producing wells by enhancing the recovery of hydrocarbons compared to exploration wells. Applying hydraulic fracturing from injected fluids is most common method used. These fluids create cracks in the bedrock and push the hydrocarbons to the […]

Mining induced stress in the area around tunnel openings represents a major design consideration in today’s potash mines. The actual induced stress is currently monitored using an array of techniques derived from the hard rock mining industry, one of the key assumptions being linear-elastic deformation behaviour of the rock. When using these methods in an […]

L’usage excessif des plastiques à l’échelle mondiale engendre de grands défis liés au control de la pollution, particulièrement dans les océans, mais aussi au niveau de l’empreinte carbonique de leur production. Dans le contexte de crise sanitaire actuel due à la COVID-19, les équipements de protection personnel sont nécessaires et leurs utilisation, obligatoire, a augmenté […]

Orthotropic bridge deck is lightweight steel deck, typically fabricated by welding “ribs” to the underside of a flat steel plate. The potential benefits of these deck systems are compelling. For example, from 1991 to 1993, the deteriorating deck on the Champlain Bridge was replaced with orthotropic steel deck panels weighing 25% less than the original […]

Unmanned Air Vehicles (UAVs) became ubiquitous in our everyday civilian lives for both recreational activities, such as sports, as well as film and photography. They have also been used in several military operations such as tactical reconnaissance. The prediction of a near future where drones will be used frequently for search and rescue, package delivery […]

The purpose of this project is to design features and enhancements to tensioned-membrane structures to achieve ‘net zero’ building performance. Net zero buildings are defined as buildings that generate as much or more energy than they use over the course of a year. Sprung Structures Ltd, a manufacturer of tensioned-membrane structures, requires assistance in researching […]