Parallel mechanisms/robots have been developed for numerous applications. At Ryerson University, it has been implemented in morphing wing mechanism design. However, an ideal morphing skin is required to create a functional morphing wing. In addition to morphing wings, other applications may require parallel robots to be covered due to environment requirements, for example, medical, industrial, […]

Volatile organic compounds (VOC) are compounds that readily evaporate at room temperature. The increasing demand and use of products containing VOC’s, has caused a rapid increase in the VOC’s entering the atmosphere. These compounds have a direct and negative impact on the environment and are also known to pose risks to human health. Currently, there […]

Le Mexique est actuellement confronté à un sérieux problème d’épuisement de ces nappes phréatiques. La vallée de Toluca qui héberge la cinquième plus grande agglomération du pays n’est pas épargnée. Des populations croissantes ont accès à des ressources en eau potable de plus en plus limitées. Toutefois, si la qualité, en plus de la quantité, […]

Water and sewer research centers have developed protocols to examine and grade assets and infrastructure already in use. These protocols are widely accepted across the world and municipalities have been using them for assessing their pipeline conditions, which is the foundation of pipeline rehabilitation projects and a key factor for their success. The major aim […]

Micro-tunneling technique is considered a feasible means to construct pipelines and tunnels in different types of ground including Queenston shale. However, this shale exhibits time-dependent deformation behavior, generally known as the rock swelling which produces additional stresses on underground structures. These stresses may exceed the allowable tensile or compressive strength of concrete of the pipeline […]

Micro-tunneling technique is a feasible means to construct pipelines and tunnels in different types of ground including Queenston shale. However, this shale exhibits time-dependent deformation behavior, generally known as the rock swelling, which produces additional stresses on underground structures. These stresses may exceed the allowable tensile or compressive strength of concrete of the pipeline or […]

The biggest limiting factor barring increased performance in today’s ultrafast computer systems is the ability to effectively remove the substantial heat generated by the microprocessors. The difficulty lies in the fact that such a large heat load emanates from a relatively small area of the system. The main objective of this project is to investigate […]

The intern will develop and evaluate new algorithms to improve the accuracy of short-term wind power forecast. The algorithm will be fed with near real-time data (wind speed, wind direction, air temperature, power production, turbine availability) from wind farms in order to improve the forecast over the next 24h. Once the best algorithm has been […]

The first part of this thesis project consist in a study of the structural behavior, mainly focusing on shear resistance, of concrete elements affected by alkali-aggregate reaction (AAR), an internal swelling reaction. Especially in the presence of moisture, this reaction causes the concrete to expand and form internal cracks. This expansion and formation of cracks […]

In 2010 and 2015, the cement industry produced approximately 3.3 and 4.1 billion tons of cement, respectively; hence almost 2 and 2.5 billion tons of carbon dioxide (CO2) were emitted, respectively. Given this rapid growth of CO2 emissions together with the importance of cement in concrete strength development, research studies have focused on approaches to […]

The purpose of the research project to be performed at the Zhejiang University of Technology is the study of the hydraulic characteristics associated with removal of ammonia nitrogen and chemical oxygen demand (COD) from wastewater treated in an anaerobic-aerobic fluidized bed. Most of the current biological denitrification processes are performed by some form of biological […]

In this project, an advanced silicon-based lithium ion battery will be manufactured. The expected energy density is 750-1000Wh/L and cycle life is about 2000 time (capacity remaining rate>80%), which means the working time of your cell phone, laptop can be extended to 3-5 times on a charge and they can maintain a good working condition […]