Ground water is the principal drinking water source in North America and approximately 150 million people relies on ground water for their domestic supply. Groundwater contamination occurs as a direct or indirect result of human or animal waste ingress to groundwater resources. The anthropogenic activity resulted in the contamination of surface and ground water with […]

Lithium-ion batteries have revolutionized electronics over the past two decades, however, they do not have sufficient energy density to meet the long-term needs of society, such as the development of electric vehicles. This formidable challenge has driven research into many new battery technologies with different chemistries and configurations, but it remains unclear which technology is […]

The fault ride-through (FRT) capability of a wind farm is major challenge because the disconnection of a large wind farms caused by network disturbances may lead to system instability and cascaded failures. Recent studies mostly focused on FRT capabilities for the voltage-source converter (VSC) based wind farms. Although, the current-source converter (CSC) based wind energy […]

There is no direct way to measure spinal loads, and existing methods are indirect and invasive; alternatively, musculoskeletal models can predict spinal loads accurately and economically. Existing musculoskeletal models of spine substantially simplify the spine and/or use optimization algorithms to estimate muscle forces. Thus, we aim to develop a subject-specific musculoskeletal model of the spine […]

Although several attempts have been carried out to derive statistics about eN Tower lightning current waveform parameters, which are essential for the design of appropriate protection systems, the results have been limited use because of the nature of the collected data. The absence of both the continuous and continuing currents from the collected data, made […]

There is no direct way to measure spinal loads, and existing methods are indirect and invasive; alternatively, musculoskeletal models can predict spinal loads accurately and economically. Existing musculoskeletal models of spine substantially simplify the spine and/or use optimization algorithms to estimate muscle forces. Thus, we aim to develop a subject-specific musculoskeletal model of the spine […]

Lors de la réalisation de pâtes de boulangerie, les ingrédients de base sont mélangés dans de grandes cuves afin de créer un pâton qui sera ensuite mis en forme et cuit. Lors du mélange, les ingrédients se lient pour passer de poudres et liquides à une pâte épaisse et visqueuse. La température de la cuve […]

To broadcast a video across the internet, digital video is first encoded to remove the spatial and temporal redundancy. The encoded video data is then transmitted at a lower bit rate or stored in a smaller hard disk without sacrificing too much displaying quality. Various video encoding standards have been developed in last decades. H.264/AVC […]

Dans un contexte de manque de main d’œuvre pour répondre à la demande croissante des personnes en perte d’autonomie à domicile ou dans les CHSLD, nous prenons les devants et élaborons un produits qui saura augmenter la sécurité et le confort de cette clientèle. Notre projet est de concevoir le cerveau de ce robot aidant […]

Microwave welding is proposed as a fabrication technique for joining thermoplastic polymer based composites. Microwave welding uses microwave energy and in the present study, a domestic microwave has been proposed to carry out the microwave welding of the thermoplastic components. Thermoplastic materials studied in this project will be considered after referring technical literature and in […]

A hi-directional converter is proposed to implement the integration of electric vehicle to the grid and household electric system. The proposed converter has two stages: a grid-connected convener. and a dc/de converter. The grid-connected converter can operate in three modes. The first of which is a battery charger. The grid-connected wi II control the power […]

Carbon Upcycling Technologies Inc. is a technological research and development company in Calgary. They chemically adsorb carbon dioxide emissions into carbon-based materials, such as graphitic nanoplates and graphene oxide, and they commercialized the technology. Recently, extending graphene-based materials into drug delivery applications is attracted their attention. However, specific targeting and intracellular trafficking are the most […]