During taxiing, takeoff or landing, parts of the landing gear of a commercial plane can undesirably oscillate. This is often the cause of premature wear of certain components. To reduce the impact of this phenomenon, the landing gear designers integrate mechanical elements whose function is to dissipate the kinetic energy associated with these undesirable oscillations. […]

Les pratiques courantes de simulation énergétique des bâtiments servant entre autres à obtenir les certifications vertes (LEED, BREEAM, etc.) ne facilitent pas la collaboration entre ingénieurs mécaniques et architectes ; ceci peut mener à des opportunités manquées de réduction de coût et d’efficacité énergétique. Le projet de recherche permettra de comparer de nouveaux outils ciblant […]

Safe drinking water supply is a daily need but it can be seriously threatened by microbial hazards originating from fecal contamination of source water, especially following periods of intense rainfall. In order to assess drinking water intakes (DWIs) vulnerability to fecal pollution and to take cost-effective decisions in case of hazardous events, it is urgent […]

A l’heure actuelle, le domaine de la construction rencontre de nombreux problèmes tant sur l’augmentation des temps de projet mais aussi des coûts. Le projet vise donc à créer un rapport, une base d’information, mais surtout une aide permettant aux divers métiers et intervenants de la construction, de mieux appréhender la coordination 3D dans le […]

This project is designated to develop a next generation optimal two-dimensional energy management algorithm for a novel grid-connected thermal/electrical hybrid energy system. On-site implementation of the model and algorithm will be phased into a real community at an undisclosed location for performance evaluation. The results of this project can be directly used by the partner […]

This project seeks to explore the practical viability of curing concrete via carbonation at ambient pressure conditions, thereby omitting the technique’s current dependency on elevated pressures. A vacuum pre-setting step and regimented CO2 injections highlight the proposed technique. Experiments will initially be carried out at the laboratory scale at the university, and then scaled up […]

In-situ recovery methods for oils sands are applied to reservoirs containing bitumen that are too deep for mining. To date there has been only one commercially viable in-situ recovery method, Steam-Assisted Gravity Drainage (SAGD), involving high pressure steam injection and bitumen production using horizontal well pairs located near the base of oil sands formations. While […]

This research project seeks to improve the process which is used to recover fine phosphorous particles from mine tailings. Phosphorus based fertilizers are important for plant growth and essential to large-scale, high-efficiency farming methods. However, the processing method used to obtain phosphate from phosphate-bearing ore is not very efficient. Upward of 13 % of the […]

Nutrients (P, N) in stormwater runoff are a major cause for eutrophication and algae blooms. Kerr Wood Leidal (KWL) is a leader in proving progressive solutions for stormwater management in BC, is seeking to improve the rain garden system to effectively capture the nutrients in the runoff. The proposed project will investigate various chemical activation […]

Ce projet porte sur l’amélioration des performances de systèmes de mesure LiDAR portés par des mobiles (navires, véhicules terrestres), qui sont de plus en plus utilisés dans les domaines de la surveillance de l’érosion côtière, de l’inspection d’infrastructures marines et des levés de caractéristiques du trait de côte. Notre projet cible les utilisateurs de systèmes […]

Most colors in nature are due to the presence of pigments or dyes. Artificial colors on different materials are produced by incorporating dyes in them. However, the brightest colors in nature, e.g. the colors of butterfly wings and peacock feathers, are generated because of the micro/nano-features on their surface. Unlike the added dyes or pigments […]

Panoptiq, is ViewsIQ’s flagship product for slide scanning and navigation in the microscopy and pathology market. This product would significantly benefit from enhanced resolution and accuracy of the images produced and improved system response time. The goal of the project is to (1) explore appropriate image processing algorithms and design new ones for Panoptiq and […]