Chlorine dioxide as antibiofilm of surfaces in the extraction process of maple sap

This project proposes to expand the investigation of the use of chlorine dioxide (ClO2) as an antimicrobial agent in the sap extraction of maple syrup industry. It is well documented that chlorine dioxide exhibits antibacterial, antifungal, disinfectant, air sterilizer, antiviral, etc., properties. However, its mechanisms of action in specific applications, tolerable concentrations, toxicity etc., must […]

Read More
Material selection and surface coating of coker valves

Coking is one of the most corrosive and abrasive environments in the refinery with a temperature of over 1000 F under high pressure condition. The function of the coker valve is to transport the fuel from heavy crude oil. Therefore these coker valves used more subject to failure than other valves used. It is crucial […]

Read More
Industry Case Studies for Forest Biorefinery Design

Transformation of pulp and paper mills to the biorefinery is increasingly being conSidered by many Canadian forestry companies. In this internship sponsored by the MITACS Accelerate program, for approximately 4 months of the 8 month internship period, Cedric Diffo will conduct an internship with West Fraser Timber Company and FPlnnovations in order to better define […]

Read More
Development of experimental test facilities and rigorous testing protocols to characterize non-linear pitot probe measurements in the vicinity of a deformable bluff body to be used at AeroLab Technology

Prediction of fluid dynamic phenomena is an area of research all on its own. A complete solution to the non-linear Navier-Stokes equations that governed fluid flow has yet to be found using modern mathematics. It is for this reason in order to characterize and test new aerodynamic sensors a test facility must exists where various […]

Read More
Production of animal feed using Methylophilus methylotrophus

This project aims to identify an efficient fermentation strategy that will enable Cvictus to generate a protein-rich animal feed using methanol as the nutrient source. The key advantage of the production platform proposed by Cvictus is the use of a proprietary technology that can convert coal to methanol with ultra-low CO2 emissions. Initial research in […]

Read More
Advanced rechargeable zinc lithium-ion battery – Part 3

There is a growing demand for the electrochemical energy storage system (EES) to store the energy generated by renewable resources of energy such as wind and solar. However, renewables are intermittent in nature meaning that the energy can be produced only when the sun is shining, and the wind is blowing. Therefore, there is a […]

Read More
Paving the way to concrete 3D printing for sustainable housing in cold regions

These two first units are sub-projects of a larger feasibility study that looks to solve the challenges that prevent the construction of housing in remote northern areas of Canada despite overwhelming need. Using 3D printing to accomplish quality housing projects in remote climates requires further research prior to being deployed. The larger context pf this […]

Read More
Adsorbent screening for CO2, N2, and O2 for Landfill Gas separation by Adsorption

The proposed project would seek to develop a technology and identify adsorbents that are better able to remove impurities such as carbon dioxide (CO2), nitrogen (N2), and oxygen (O2) from biogas (mostly CH4, also referred to as natural gas) produced from landfills, using adsorption technology. Interns will be carrying out adsorbent screening, by determining kinetics […]

Read More
Punching Shear Behavior of Glass Fiber-Reinforced polymer Reinforced Concrete Slab-Column Edge Connections Under Lateral Cyclic Loading

The applicability of reinforcing slab-column edge connections with fiber-reinforced polymer (FRP) bars in resisting gravity loads has been validated through several investigations. The elastic nature of FRP reinforcement raises concerns about the feasibility of using this type of reinforcement in reinforced concrete (RC) structures in seismic regions. To date, only one study has been conducted […]

Read More
Punching Shear Behavior of Glass Fiber-Reinforced polymer Reinforced Concrete Slab-Column Edge Connections Under Lateral Cyclic Loading – Year two

The applicability of reinforcing slab-column edge connections with fiber-reinforced polymer (FRP) bars in resisting gravity loads has been validated through several investigations. The elastic nature of FRP reinforcement raises concerns about the feasibility of using this type of reinforcement in reinforced concrete (RC) structures in seismic regions. To date, only one study has been conducted […]

Read More
Étude des états limites en pression des pompes centrifuges Technojet multistage

Les pompes centrifuges multiétages sont des équipements sous pression travaillant sous des conditions sévères où le débit et la pression de fluides varient d’une façon cyclique. Le fluide est aspiré au niveau du premier étage à une faible pression et est refoulé à haute pression au dernier étage à travers la section dite de décharge. […]

Read More