The main purpose of this research project is to integrate wind power with cryogen production, which could be one of the most low-carbon and economic methods to generate and store energy. As it can be transported and stored relatively easily, the cryogen becomes an energy vector, like a fuel, that can be used to transport […]

This proposal concerns with monitoring of composting processes at the Edmonton Waste Management Branch Utility. The ultimate purpose is to establish a practical framework and plan to examine the current state of composting processes and to identify potential areas for improvement. To gain a comprehensive overview of composting, all involved unit operations will be monitored […]

Additive manufacturing (AM) is a process family which is widely used for deposition of thin protective layers of novel alloy materials on components operating in severe conditions, and also for fabrication and repair of complex 3D parts. The scope of this research is to establish a process planning framework for metal based bead deposition processes […]

Modern roundabouts have become a subject of great interest and attention over the last few years. Compared to regular signalized intersections, roundabouts have the potential to reduce vehicular delay, emissions and increase safety. The objectives of this study is to conduct a life cycle cost analysis (LCCA) to examine the short and long term benefits […]

In recent years, the remediation of residual and historical soil and groundwater contamination has become a priority for the oil and gas industry. Due to increasing public awareness and media attentions, the exploration and implementation of cost-effective and environmentally friendly approaches for remediation of contaminated sites has increased significantly as a mechanism to demonstrate social […]

This project will help the industrial partner design tests to prove a concept for fusion energy production. In the tests, metal cylinders (and other shaped liners) are dynamically collapsed to compress a high temperature plasma to fusion conditions. This highly dynamic event, however, may result in some of the metal from the cylinder contaminating the […]

While GPS has become the de-facto standard for positioning, its availability and accuracy are hindered by attenuations. Positioning using vision-based systems is becoming an attractive solution due to its infrastructure-less architecture and its wide integration into portable devices. This work aims to develop novel vision-based algorithms for head-mounted sensors that would solve various problems such […]

Recent advancement in computer vision and sensing technology has shown great potential for autonomous vehicles. This work aims to studies using an Augmented Reality heads-up display to improve the reliability of Advanced Driver Assistance Systems (ADAS). The algorithms developed will help drivers detect obstacles e.g. pedestrians crossings, improve current lane departure warnings to allow a […]

Heating and cooling in residential and commercial buildings account for 20% of total energy consumption in Canada. Conditioning indoor air using less energy is closely associated with minimizing production of greenhouse gases and making a sustainable global environment. In this study, we apply a nanocomposite fibrous membrane for an energy recovery ventilator (ERV). Heat and […]

Heating and cooling in residential and commercial buildings account for 20% of total energy consumption in Canada. Conditioning indoor air using less energy is closely associated with minimizing production of greenhouse gases and making a sustainable global environment. In this study, we apply a nanocomposite fibrous membrane for an energy recovery ventilator (ERV). Heat and […]

Wave uprush and the potential for flooding are natural hazards that must be determined by the Cataraqui Region Conservation Authority (CRCA) prior to the approval of a near-shore development. The purpose of calculating wave uprush is to recommend building sites that are outside of the wave uprush area (and floodplain in general) to land owners […]

Turbine discs are critical rotating parts of aircraft turbofan jet engines and are manufactured as separate units. In order for production acceptance of the forging technique used to manufacture turbine discs, a large amount of testing is conducted. This testing completed on raw materials and finished products includes a series of tensile and Low Cycle […]