In general, when a more viscous fluid is displaced by a less viscous one, instabilities grow at the interface between them which are referred to as viscous fingering. Viscous fingering is of paramount importance in many applications including, but not limited to, contamination transport in underground waters, enhanced oil recovery, filtration, and chromatographic separation of […]

The greatest river in Calgary, Bow River, is an important source of water for industrial, agricultural and living activities for city and people of Calgary. With the incredibly fast of urbanization in Calgary, the natural landscapes are gradually replaced by impervious areas, such as urban streetscapes, houses and buildings. While the amount of water that […]

We will develop advanced software toolkits for seismic inversion and imaging. These method are called Full Waveform Inversion and Reverse Time Migration (FWIIRTM). The FWIIRTM will be used to obtain accurate 30 images and elastic properties of subsurface complex structures.

The steam assisted gravity drainage (SAGD) is the most commonly employed process for extraction of oil or bitumen from oil sands reservoirs. This process involves injection of large quantity of steam into the oil reservoir. The injected steam is further recovered as produced water which constitutes high concentrations of hydrocarbons and mineral salts. Due to […]

Global warming and climate change have been increasingly attracting the attention of researchers and the public in the past few decades. It is believed in the scientific community that climate change is a direct effect of the increase of greenhouse gases (GHGs) in the atmosphere. Carbon capture and sequestration (CCS) is a promising solution for […]

Biomass is a key feedstock for the production of renewable fuels and chemicals with potential zero carbon emissions and at low cost. State of the art conversion of biomass to bio-fuels focuses on the pyrolysis of the feedstock at high temperature in conventional reactors. However, current technologies face many challenges to achieve lower costs than […]

The Project’s objective is to continue with development and optimization of the promising HTL biocrude upgrading approach that has been executed during the previous MITACS Converge/Accelerated project. The activities are going to be focus on in-situ hydrogen production to limit external cost of hydrogen and process optimization for the obtention of Jet and Marine fuel […]

In October 2017, Mexico’s Congress passed the General Law on Disappearances, the first federal-legal measure of its kind. After eleven years of extreme violence that coincide with the War on Drugs, more than 37,000 (RNPED, 2018) persons are officially disappeared, though it is widely suspected the figure is now in excess of 40,000. This research […]

Shale reservoirs store gigantic volumes of petroleum (oil and gas). However, because of the complex nature of the reservoir rock, it is difficult to recover the oil and/or gas stored in shales. Under normal conditions, it is possible to extract only as much as 10% of the resources in place, thus leaving behind a huge […]

Shale reservoirs have become a very important source of hydrocarbons, especially in North America. Shales are rocks with very low permeability and therefore, produce the hydrocarbons stored in them is difficult. In order to do it, oil companies have to inject high pressurized fluids to break the rock. But, by using this unique strategy, most […]

I am a member of ArcTrain project, which is an international collaborative research and training experience program between Canadian and German scientists funded by NSERC CREATE. I am offered the opportunity to study for four to twelve months at a partner institution in Germany, to develop a better model for my research on Greenland Ice […]

In an effort to ensure pipelines continue to operate in a safe condition, various inspections and assessments are completed on a continual basis during their operating lifespan. These assessments include radiographic or ultrasonic examinations, forms of non-destructive examination (NDE), of circumferential girth welds formed between multiple pipe sections. The purpose of this project is to […]