While the medical-scientific basis of breathing/breathlessness are relatively well understood, the subjective experiences of and discourses surrounding breathing/breathlessness are poorly understood. Moreover, breathlessness is disproportionately experienced by people living in the “global south,” yet has never been researched through a (post)colonial framework. My project addresses these research gaps in two ways. Firstly, I will analyze […]

Gallium-68 (68Ga) is a radioactive isotope that undergoes a decay process that emits gamma rays suitable for an imaging technique called Positron Emission Tomography (PET). The 68Ga is attached to molecule which targets the isotope to specific types of cancer such as prostate and neuroendocrine. With a relatively short half-life, it means that half of […]

The goal of this project is to design computationally-efficient solvers that can be used for autonomous vehicle control developments. Because autonomous cars have complex mathematical models, it is usually hard to perform their necessary control computations on-line and when the vehicle is running. Therefore, it is required to come up with much faster solvers for […]

Flexible wearable sensors have found increasing application in many situations, especially in biomedical engineering and health care. Recent research has presented methods for fabricating flexible, stretchable, and conductive sensors using silver nanowires embedded in a flexible silicon elastomer (typically polydimethylsiloxane (PDMS)) as dry electrodes for ECG (electrocardiograph). In this project, we will investigate how the […]

The purpose of the present study is to scientifically evaluate the physical demand associated with the safe operation of a snowmobile under typical (normal) riding conditions experienced by North American snowmobilers. We will quantify the physical demand of snowmobile riding and compare this to national recommendations for the promotion of health and fitness, as well […]

The student will use ion beam synthesis to fabricate germanium thin films integrated with silicon substrates. The fabrication will use a method pioneered within our group, known as implantation-condensation. Silicon is bombarded with germanium atoms and subsequently heated to a temperature of 1000C in an oxygen atmosphere. The silicon is removed leaving a high quality […]

The research will look at the use of community-managed marine protected areas (MPAs) to deal with abrupt and long-term environmental and social changes taking place in the Ria Lagartos Biosphere Reserve, Merida, Mexico MPAs have long been used to protect marine species and ecosystems, but their social considerations have yet to be fully studied Information […]

Transportation that uses green energy is environmentally friendly and helps to reduce greenhouse gas emission. But there is a tension between the stakeholders, policy makers and public on their economic return, policy implementation and perception on innovation in technology in transit respectively. Analysis on outreach opportunities to support transit modernization in to green technology will […]

Urinary tract infections (UTIs) are among the most prevailing infectious diseases on a global scale. Every year, an estimated of 150 million people are affected by UTIs worldwide, and the majority of those infections (~ 80%) are caused by uropathogenic Escherichia coli (UPEC). Rapid, inexpensive and sensitive detection of UPEC is critical given its recurrence […]

Cold Spray is an established coating additive manufacturing process. Centerline has the opportunity to establish itself in a very large worldwide market if they can improve the ability of their cold spray process to metallize polyamide 6-6 substrates with enhanced deposition efficiency. The overall general objectives are twofold: 1) Analyze experimentally the cold spray process […]

For over than thirty years, chemists have applied sulfur-based organic molecules to gold sheets to form coatings with a single molecule thickness. Although these coatings have potential applications in sensors and microelectronics, they gradually decompose under moderate heat and in air, limiting their applications. In 2014, the Crudden group demonstrated that N-heterocyclic carbenes (NHCs), which […]

Pulmonary hypertension or elevated blood pressure in the lung caused by left heart diseases such as mitral valve stenosis is classified as Group 2 under the World Health Organization pulmonary hypertension classification system. Group 2 pulmonary hypertension is the most common type of pulmonary hypertension, but currently there is no approved therapies for this disease. […]