Organic light emitting diodes (OLEDs) are thin layers of organic chemicals with that emit light. As a novel form of technology, OLEDs can be used to manufacture flexible and ultrathin visual screens for mobile phones and televisions. They are extremely efficient; they produce very bright lights while producing very little heat. Designing better and cheaper […]

In the operation of CANDU reactors, the Zr-2.5Nb pressure tubes holding the cooling water and fuel bundles are susceptible to hydride cracking-induced crack initiation mechanisms, known as delayed hydride cracking and overload crack initiation. It is required to evaluate the likelihood of DHC and overload crack initiation from service-induced flaws to determine whether the pressure […]

The objective of this project is to integrate ultrasonic imaging into nondestructive inspection process performed in industrial settings on large size steel blocks. Indeed, Fink Steel is specialised in manufacturing large size forged steel and need to warrant the quality of each part before shipping using ultrasounds. This imaging method based on the same principle […]

The student will use ion beam synthesis to fabricate germanium thin films integrated with silicon substrates. The fabrication will use a method pioneered within our group, known as implantation-condensation. Silicon is bombarded with germanium atoms and subsequently heated to a temperature of 1000C in an oxygen atmosphere. The silicon is removed leaving a high quality […]

Cold Spray is an established coating additive manufacturing process. Centerline has the opportunity to establish itself in a very large worldwide market if they can improve the ability of their cold spray process to metallize polyamide 6-6 substrates with enhanced deposition efficiency. The overall general objectives are twofold: 1) Analyze experimentally the cold spray process […]

The University of Saskatchewan (U of S) specializes in developing and building instruments which make detailed measurements of the composition of the atmosphere. These measurements provide a key link to the Earth’s climate system and are important in estimating and predicting air quality. The U of S has partnered with ABB Inc. to develop an […]

This research addresses the feasibility of using FRP reinforcement in concrete beams taking into consideration the effect of fiber dosage and prestressing level in order to enhance the structural performance, time efficiency and optimised-cost. Full-scale precast concrete I-beams will be tested as simple beams to determine their flexural and shear capacity. The test parameters include […]

Rapid prototyping, or 3D printing, has inspired the imagination of the general public, from simple build-it-yourself “hobby” machines using polymer-based binder material with inkjet functionality, to portable printers that can fashion components in zero gravity on the International Space Station. The functionality is user-friendly, in that printed material is dropped onto a substrate in viscous […]