Preliminary work has shown that adding excess CEACAM1-specific antibody, 26H7, to hela cells expressing carcinoembryonic-antigen-related cell-adhesion moleule (CEACAM) 1-4L decreases CEACAM1-4L in the plasma membrane and shifts their surface expression from a monomer-oligomer mix to mainly monomers. A super resolution microscope will be used to co-localize CEACAM1-4L with 26H7 in order to determine the optimal […]

In this project, Cardon Rehabilitation and Medical Equipment (CRME) and the University of Waterloo (UW) will test the Automated Rehabilitation System (ARS) for lower body physiotherapy in a clinical environment. ARS provides the ability to measure the human pose during the performance of rehabilitation exercises and provide real time feedback. CRME and UW are interested […]

Forests in British Columbia have significant areas that need to be managed to limit the danger of fire and disease. Under current management approaches, there are few cost-effective options available to areas that are not already regularly harvested. A holistic analysis of pelletization of these materials could show that the sale of wood pellets, as […]

To be safe and efficient, autonomous robots will need to consider and understand one another when performing their respective tasks. Communication and joint planning between robots might not be possible due to the number of robots, adversarial behaviors, or the lack of common protocol. In this project, we start by tackling this large issue at […]

Micropollutants can be found in almost all water bodies due to their recalcitrant character. As conventional treatment plants are not efficient for many recalcitrant pollutants, oxidative methods and physical treatment methods have been widely applied for treatment of wastewater. Green enzyme-Laccase has high ability to transform many kinds of micropollutants, such as recalcitrant contaminants, into […]

This project assesses the feasibility of using drones to inspect aircraft for surface damage and defects such cracks, fractures or dents. The intern will first carryout a comprehensive literature review and environmental scan of the existing technology. He will then assist in developing and conducting a series of physical tests to determine the best camera […]

A veneer wythe protects the indoor environment and other building components against adverse outdoor effects, such as rain and physical impacts. Veneer walls are connected to a structural substrate (e.g. wood frame or masonry units) by ties. These are usually made of steel and therefore high in thermal conductance. The ties penetrate the thermal insulation […]

This project focuses on improving the performance of the real-time video streaming over Wi-Fi networks, in which losing packets is a serious concern. State-of-the-art methods try to improve the robustness of AL-FEC mechanisms by providing unequal protection to the packets. But such approaches are complex and increase even more the delays. In contrast, the proposed […]

Le transport adapté des personnes ayant des besoins particuliers est une activité qui demande des outils et méthodes de planification différents du transport collectif régulier. Dans ce projet, nous proposons trois éléments : 1) des modèles de prévision de la demande de transport adapté à court et moyen terme, 2) un outil de planification permettant […]

Over 70% of tasks in manufacturing are still manual and because of this over 75% of the variation in manufacturing comes from human beings. Human errors were the major driver behind the $22.1 billion in vehicle recalls in 2016. Currently when plant operators want to gain an understanding of their manual processes, they send out […]

This project will test a variety of operating conditions used in anaerobic digestion (AD) in wastewater treatment (WWT) plants. The purpose is to identify optimal conditions for AD treatment process. Optimization of AD process would increase production of biogas for production of renewable energy, increase yield of bio-products for agriculture use, reduce WWT plant operating […]

Current needs for renewable and emission-free technologies imposes hydroelectric power plants to generate power in a predictable and reliable fashion. Replacing metallic to polymeric coatings in thrust bearings allows hydroelectric turbines to operate at a wider range of operation parameters. However, the sensibility of polymeric materials to the manufacturing method imposes important uncertainties on the […]