Stents are tubes placed between the kidney and the bladder which prevent blockages which might otherwise damage the kidney. Introducing foreign material into this system allows a platform for bacteria to exist and which will potentially cause infections. These are very common. We propose modifying the surfaces of the materials used in stents to make […]

The goal of this research is to improve breast cancer local control and reduce treatment side effects by demonstrating that a new cold plasma technology, which generates locally specific reactive oxygen species, has an additive positive treatment impact when combined with conventional radiotherapy. This project has the potential to enable a Canadian technology, to become […]

Plasticizers are used to increase the flexibility and workability of relatively rigid polymers such as poly(vinyl chloride) (PVC). For decades, di-2-ethylhexyl phthalate (DEHP and sometimes termed as dioctyl phthalate (DOP)) was the most common plasticizer used in PVC formulations. However, DEHP has been shown to have negative health effects, such as being an endocrine disruptor. […]

The joint objective of the consortium is to undertake R&D necessary to produce a scalable, cost-effective combined hydrogen storage and fuel cell solution for UAV’s that addresses weight and volume and improves refueling logistics. The novel hydrogen storage system will be combined with a high-power density optimized fuel cell stack for UAV’s that integrates with […]

New generation of civil transport aircraft can present aeroelastic coupling between flight mechanics and structural dynamics. The lower-frequency flexible dynamics can be perceptible by a fly-by-wire controller. This requires control law design that take into account the flexible dynamics. Robust control techniques have been investigated over the past 20 years for this purpose. They result […]

This research will focus on the development of recycling solutions for laminated particleboard after services. To effectively recycle the wood particles from the used particleboard as suitable raw material, it needs to remove the cured adhesives from particleboard, usually urea-formaldehyde (UF) resins. It is well known that cured UF resins are susceptible to hydrolysis so […]

The goal of this project is to improve the processing on hearing aids for music. Currently hearing aids are designed for speech, but for some hearing aid users music is an important part of their lives. A concert where the room acoustics are changed will be used to collect audio samples for testing changes to […]

Les travaux de recherche appliquée visent à évaluer le potentiel du bois imprégné au polymère provenant d’essences indigènes nordiques (région de l’Abitibi) pour les boiseries de canots. L’application visée est les accessoires des canots et non la coque des canots. L’essence majoritairement utilisée par l’industrie du canot est le frêne blanc. Le partenaire désire utiliser […]

On retrouve de plus en plus de robots qui collaborent avec les travailleurs pour augmenter la productivité des entreprises. Dans le contexte industriel, ces robots sont souvent utilisés pour saisir des objets et effectuer des tâches avec ceux-ci. En général, les robots sont équipés de caméras leur permettant de voir et saisir les objets présents […]

Hazelnuts are a new crop being explored in Ontario by Ferrero Canada with the potential to reach significant acreage (10,000 hectares). Hazelnuts currently only occupy less than 300 acres in Ontario and this project will investigate how hazelnuts can transition from a niche product to achieve major adoption in Ontario’s farming community. Interviews will be […]

Under Ontario’s regulations, facilities generating thousands of tonnes of greenhouse gas (GHG) emissions per year must report their emissions, and industries are motivated to reduce GHGs through ‘Cap-and-Trade’ regulations. Based on the Power-to-gas concept, this research will develop a techno-economic-environmental model for hydrogen-based energy systems that include electricity from the utility grid and distributed renewable […]

Due to increasing miniaturization, future systems will be made of components that are more energy efficient and at the same time more sensitive to external radiation. To ensure that future systems remain protected against cosmic radiation and single events, aircraft and flight systems manufacturers must collect in-flight data for cosmic radiations and develop a global […]