Simulation of Aeration inside a Hydroelectric Turbine

This research project is aimed at improving the oxygenation of water downstream of hydroelectric dams; one of the issues being to preserve the aquatic fauna. The goal is to develop the fundamental understanding and applied technology needed by industry in the field of two-phase flows. Experimental and numerical tools are developed to design similar laws, […]

Read More
Research on Wideband Tunable Semiconductor Laser

Wavelength tunable lasers are indispensable in future wavelength division multiplexing networks which can improve the communication capacity significantly. The objective of this project is to develop wavelength tunable semiconductor lasers with an ultra-wideband. By exploiting wave manipulation method, we will target the physical realization of such a device with high fabrication yield and high reliability. […]

Read More
Research on Fast and Accuracy Photonic Integrated Devices and Circuit Simulation Method

In comparison to the well-developed electronic design automation (EDA) tools of microelectronics, the simulation tools of burgeoning photonics are too coarse. Time-assuming and computer memory hungry characters restrict tradition method application on photonic devices and circuits simulation. So, the aim of the proposed research project is to find a high accuracy and efficiency simulation method […]

Read More
Investigation of Low-Ductility Geogrid Reinforcement for Ground-supported Concrete Structures

Steel rebars are the dominant reinforcement elements in reinforced concrete structures due to their relatively adequate manufacturing, material property and established construction codes. In an ideal environment and under nominal loading, conventional concrete reinforcement is expected to govern the design strength based on which they are designed. However, under environmental loading conditions, such as very […]

Read More
Développement d’un système automatisé de suivi de l’avancement d’un projet de construction à l’aide des technologies d’acquisition de données

Ce projet vise à proposer un système qui va permettre aux surintendants et aux gérants de construction de pouvoir évaluer et suivre l’avancement des travaux. De plus en plus de projets basent leur conception sur des modèles 3D permettant l’accès à plus d’informations et de détails que les plans 2D traditionnels. Ainsi, le système proposé […]

Read More
Méthodes de prédiction pour la collecte d’huile usagée

Le projet de recherche porte sur la prédiction probabiliste d’une demande intermittente. On cherche à prédire la distribution statistique du niveau de remplissage d’un réservoir en fonction du temps, à l’aide des données des derniers services. Ces prédictions permettront d’optimiser les fenêtres de temps des prochains services. De ce fait, on augmentera le taux de […]

Read More
Micro Refinery Unit, GTL

The Home University, the Home Supervisor and the intern involved with this Mitacs Globalink project agree to be bound by the standard intellectual property (IP) terms of the Canadian university and, furthermore, hereby irrevocably assign all their rights, title and interest in and to any Project Intellectual Property to the Canadian University, as may be […]

Read More
Styrenic Polymers Debromination and Recycling

The current feedstock of en-life high impact polystyrene (HIPS) is currently impossible to be valorized and recyled due the presence of brominated fire retardants (FRs). The presence of those FRs is consequence of the need from the electronic industry to compile with the security regulations. However, now those brominated compounds are to be banned due […]

Read More
Modeling of Pressurized Chemical Looping Combustion in a Novel Toroidal Fluidized Bed

Carbon capture and sequestration (CCS) technology provides a promising avenue to reduce carbon emissions. CCS works by capturing and storing carbon dioxide preventing it from contributing to climate change. Pressurized Chemical Looping Combustion (PCLC) is a promising next generation CCS technology that use a metal catalyst to react hydrocarbon fuels in an efficient way allowing […]

Read More
Networks and Smart Sensors for Safety-Critical Avionics Applications

High channel count sensor and actuator devices are needed to tackle a growing number of functions in aircrafts. With traditional avionics technology, connecting these devices results in bulky wiring bundles. The stringent safety standard of avionic systems requires redundant installation of all components on board, which further exacerbates the situation. Moreover, in new avionic systems, […]

Read More
Conception et analyse du cycle de vie d’un pont routier avec platelage en aluminium sur poutres en bois lamellé-collé

Ce projet de recherche vise à optimiser l’utilisation d’aluminium dans la conception de ponts routiers. Des recherches récentes montrent que l’aluminium pourrait présenter de nombreux avantages économiques grâce à son excellente durabilité, le peu d’entretien qu’il nécessite et son recyclage en fin de vie. Ces avantages seront tangibles dans la durée et non pas lors […]

Read More