Aqueous rechargeable lithium battery has received great attention recently due to the less toxicity, lower cost and higher safety compared to the non-aqueous systems. When using the commercially available lithium manganese oxide as active materials, there are demands in suppressing manganese dissolution and graphite consumption in the cathode. As a potential solution to achieve these […]

Etalim is a Canadian high technology company developing a breakthrough heat engine generating electricity from any fuel or heat source. The Etalim TAC (Thermal Acoustic Converter) is a unique technology that converts any high temperature gradient to electricity, with high efficiency (20%-30%) and simplicity. The TAC represents a unique class of device that combines principles […]

Production and utilization of ammonia in the transportation and power generation sector brings numerous advantages by introducing environmentally friendly, sustainable and efficient systems. Ammonia (NH3) is the only carbon-free chemical energy carrier together with hydrogen suitable for use as a transportation fuel. In this project, renewable energy based NH3 production methods are investigated for power […]

The conversion of low value lipids, including tall oil, brown grease, and yellow grease, to hydrocarbons without the use of hydrogen or catalyst has been patented and scaled up by our group (Forge Hydrocarbons). This project seeks to develop an improvement to the existing process by incorporating microwave heating to the reactor configuration. The process […]

Hydrogen powered polymer electrolyte membrane fuel cells (PEMFCs) are a clean energy technology that generates electricity without harmful emissions at the point of use. To accelerate commercialization, current R&D efforts mainly target reduced cost and increased lifetime. The proposed research project addresses both aspects by developing a unified chemical and mechanical modeling platform for evaluating […]

Hydrogen fuel cells require humidification in order to operate effectively, yet, at the same time produce a constant stream of moisture through their exhaust. Membrane fuel cell humidifiers provide a method of ‘recycling’ this moisture, thereby saving energy. They work similarly to heat exchangers, but take advantage of special polymer membranes in order to exchange […]

The rapid depletion of fossil fuels (such as Coal, Natural gas, Oil etc.) and the escalation in environmental pollution have prompted increased investigations in the field of alternative energy sources. In this context, solar cells are being studied to satisfy the increasing power needs of today’s society as photovoltaic power uses pollution-free energy source, solar […]

This research will identify best practices for the design of renewable energy investment programs targeting the social housing sector. Involving mixed methods of research, including literature review, interjurisdictional scan, and strategic interviews with third party experts, the research will result in a set of actionable recommendations for provincial and federal governments, municipal social housing authorities, […]

Ocean wave energy converters (WECs) are devices that utilize ocean energy to produce electricity or fresh water. A key stage in developing these devices is scale model testing in wave tanks, as it allows the power generation capabilities of a design to be evaluated at a much lower cost and with no environmental risk compared […]

Wind energy is the fastest growing source of electricity in Canada. However, its supply is not aligned with the energy demand, thus energy storage becomes important. The Power to Gas process (P2G) is a promising technology in which electrical energy is converted into chemical energy (methane). Methane can be stored in already existing natural gas […]

The proposed study will develop seismic design guidelines for retrofitting deficient concrete bridge columns with sprayed fiber reinforced plastic (FRP). Seismically deficient bridge columns (with different aspect ratios and transverse reinforcement ratios) retrofitted with composites will be tested under reverse cyclic loading. The tests will determine various damage states in terms of strain and drift. […]

ABRI-Tech and Memorial University (MUN) have been collaborating to optimize ABRI-Tech’s pyrolysis system to convert woody biomass (i.e. demolition wood waste, sawmill residues, forest residues, agricultural and other residues) to bioproducts.