Optical and Electrochemical Corrosion Detection and Protection

During the proposed internships, adaptive corrosion protection system (ACPS) will be developed as a stand-alone unit to provide optimum corrosion protection by changing the protection power according to the changes in environment or the material properties. This will allow the dynamic adjustments by implementing the feedback loop for the protected system. The proposed ACPS will […]

Read More
CryoVent – Low or zero carbon cryogenic ventilation for deep mines

The main purpose of this research project is to integrate wind power with cryogen production, which could be one of the most low-carbon and economic methods to generate and store energy. As it can be transported and stored relatively easily, the cryogen becomes an energy vector, like a fuel, that can be used to transport […]

Read More
Experimental and Mathematical Modeling of Flow Instability in Heavy Oil Recovery Processes

This research project with the industry partner Saskatchewan Research Council focuses on the displacement front instability in heavy oil recovery processes such as water flooding, solvent injection and polymer flooding. In those processes, the less viscous displacing fluid usually moves faster than the more viscous displaced heavy oil. This results in an instability that manifests […]

Read More
Integrated Subsea Pipeline Integrity Management using Real-time Condition Monitoring Technique

Integrated integrity management is essential for subsea pipeline failure prevention, predictive maintenance and life extension campaign. Without managing integrity adequately, the condition of subsea pipeline would continue to deteriorate until premature failure. Real-time Condition Monitoring (CM) is a sensor-based monitoring technique aimed at enhancing the productivity of pipeline operation. The main intent of condition monitoring […]

Read More
Crystal Orientation-Wetting Property Relationships for Cerium Oxide

Improving the durability of superhydrophobic surfaces is of significant interest in the surface engineering community. We have recently developed a novel superhydrophobic coating with a hard nanocrystalline nickel matrix and embedded hydrophobic polytetrafluoroethylene (PTFE) particles. To further improve the mechanical robustness of the non-wetting coating, the soft polymeric PTFE particles were replaced with hard, hydrophobic […]

Read More
Optimization of Reserve Crew Open-Time Pairings at Jazz Aviation LP

The crew scheduling problem deals with the assignment of crews, both pilots and flight attendants, to a given flight schedule, which first requires flights to be grouped into sequences known as pairings which begin and end at the same base or city. Crew pairings must comply with extensive collective agreement rules. This project deals specifically […]

Read More
Enhancing service quality in community health care through preference-based scheduling

In this project, the intern will develop an integrated patients and care givers scheduling system for the allocation of health care resources in community health care. This system provides patients with an online preference collecting interface for them to express their preferences on time, location, and care givers when estimating their service costs and booking […]

Read More
Development a Stabilized Computer Vision System for Infrared Aerial Fire Monitoring

Hummingbird Drones provides aerial fire monitoring services to the BC Wildfire Service through the use of Unmanned Aerial Vehicles (UAVs). They conduct night-time flights over wildfire zones to locate and map hotspots for ground crews. Their current operations suffer from two bottlenecks: a heavy camera stabilizer which decreases flight time, and long post-processing time after […]

Read More
Minimizing potential induced degradation in crystalline-silicon based photovoltaic solar modules – Year 3

The demand for photovoltaic solar modules has increased tremendously in recent years. Unfortunately, photovoltaic solar modules are prone to potential induced degradation, i.e., a decrease in the power delivered from such modules arising as a consequence of them operating continuously under high applied voltages. This project aims to design a protocol for the accelerated testing […]

Read More
Hybrid Power Systems for Integrated Energy and Food Production in Autonomous Communities

Community integrated energy and food systems bring production and management to the local scale in order to increase autonomy and resiliency. These are particularly expedient in the face of global climate change, more frequent and severe extreme weather, geopolitical instability and peak oil. Bioenergy systems offer enormous potential for such applications because they stand at […]

Read More